Home ProductsEconomical Glass Scale (Encoder)

Economical Glass Scale (Encoder)

< >

Industrial glass scale

Measuring length: 50mm to 3200mm Resolution: 0.1 μm 0.2 μm 0.5 μm, 1 μm, 5 μm Output signal: 5V TTL square wave differential output (long wire drive) 24V NPN open collector Operating temperature: 0 - 40 ° C

Download

Industrial scale FC2 (thin feet)
Measuring length: 50mm to 3200mm
Resolution: 0.1 μm 0.2 μm 0.5 μm, 1 μm, 5 μm

Output signal: 5V TTL square wave

Differential output (long wire drive)

24V NPN open collector

Operating temperature: 0 - 40 ° C

Output waveform:
TTL Output (Standard)		Differential output (optional)

Output wiring definition:

signal	8-core cable	9 Pin CAN	Remarks
+5 V/+24V	red	1	TTL&LD
0 V	black	2	TTL&LD
A phase	Brown	3	TTL&LD
B phase	yellow	4	TTL&LD
Z phase	Orange	5	TTL&LD
Z invert	green	6	LD
A is inverted	purple	7	LD
B inversion	blue	8	LD
Shielding	silver	9	TTL&LD

Technical characteristics:

Measure the length	50-1000 mm (50mm / file), 1100-3200 mm (100mm / file)
Resolution	0.1μm 0.2μm 0.5μm,1μm,5μm
Accuracy	± (5+L)/200µm, at 20°C
Measure the speed	0.5m/s(0.5µm) , 1m/s(1µm) , 2m/s(5µm)
Operating force	less than 5N
Operating Voltage	5Vss ± 5%, 24v (optional)
Current (Input)	max. 35mA
Current (single-phase output)	max. 4 mA
Degree of protection	IP 40
Operating temperature	0-40°C

Grating signal commonly used acquisition method:

1. Grating digital display table:Single axis Two-axis / three-axis

2. AdoptedJJX3000 (signal transfer box)Connection PLC high speed counter (24V NPN open collector signal input)

3. Direct connection PLC high-speed counting module (5V TTL or 5V differential signal input)

4. Connect PLC high-speed counter (need to order 24V NPN open-collector signal output scale)

5. With four multiplier function of the computer counting board JJX-6000 (PCI interface, serial communication)

Hot - line：400-900-8812

Products

Economical Glass Scale (Encoder)

Industrial glass scale